To use self adhesive fiberglass drywall joint tape, follow these steps:
1. Clean the surface: Make sure the area where you will be applying the tape is clean and free of dust, dirt, and debris.
2. Cut the tape: Measure the length of tape needed for the joint and cut it to size using a utility knife or scissors.
3. Position the tape: Place the tape over the joint, pressing it firmly onto the drywall to ensure it adheres properly.
4. Smooth out any wrinkles: Use a drywall knife or putty knife to smooth out any wrinkles or air bubbles in the tape, making sure it lays flat against the wall.
5. Apply joint compound: Once the tape is securely in place, apply joint compound over the tape, using a drywall knife to spread it evenly and cover the tape completely.
6. Let it dry: Allow the joint compound to dry completely before sanding and applying additional coats as needed.
7. Sand and finish: Once the joint compound is dry, sand the surface smooth and finish with paint or texture as desired.
| Mesh Size | 6x6mesh,8x8mesh,9x9mesh,12x12mesh etc. |
|---|---|
| Weight | 40g/m2-120g/m2 |
| Width | 48mm-1200mm |
| Length | 10m,20m,45m,90m etc. |
| Color | White,blue,yellow etc. |
| Packing | carton |
