The steps to use the paper perforated tape:

1.Preparation

Before starting, make sure the surface to be taped is clean and free of any dust or debris. Apply a coat of joint compound onto the joint, spreading it evenly and covering the entire area.

Cutting

Measure the length of the joint to be taped and cut a piece of paper perforated drywall joint tape to the appropriate size.

Application

Place the paper perforated drywall joint tape over the joint, pressing it lightly into the joint compound. Use a drywall knife to smooth out any bubbles or wrinkles.

Finishing

Once the paper perforated drywall joint tape is in place, apply a second coat of joint compound over the tape, spreading it evenly and feathering it out to the surrounding area. Wait for the joint compound to dry completely.

Sanding

Sand the joint compound smooth using fine-grit sandpaper, and wipe away any remaining dust with a clean cloth.

Additional Coats

Depending on the size of the joint and the desired finish, additional coats of joint compound may be required. Repeat steps two through five as needed to achieve a smooth and even finish.